Snow Blower Impeller Kit ™
LifeTime MoneyBack Guarantee!
 If you are ever dissatisfied with our product, you can
 return it for a full refund of your purchase price!
  To Order your kit securely via EBay and PayPal, select the appropriate link below

Two-stage snow blower isn't throwing snow like it used to?

 (3) Blade Kit - $25 + S&H

 

Frustrated with clogged discharge chutes? 

(4) Blade Kit - $30 + S&H

 

You need a Snow Blower Impeller Kit

(5) Blade Kit - $35 + S&H

 

Limited Liability Disclaimer:  At no time shall manufacturer be held liable for any consequences, either direct or indirect, resulting from the installation or use of any product purchased from manufacturer. Manufacturer makes no warranty or guarantees, either express or implied, as to the specific results obtained through the installation of our products. Buyer agrees to purchase and use this product at their own risk

 

(1) Blade Kit - $10 + S&H

 

The Problem:

 

If your TWO-STAGE snow blower’s discharge chute keeps clogging up when you try to move very heavy or wet snow or slush, it is probably because there is a gap between the impeller blades (the 2nd set of vertical blades behind the main front horizontal auger blades) and the impeller chamber wall. 

This "gap" allows snow and slush to slip by the blades and build up in the chute clogging it. This gap also decreases the efficiency of the impeller's ability to propel the snow up the chute resulting in less throwing distance. This problem is well known to people with two-stage snow blowers and the easy and quick fix is to modify the impeller blades by adding a strip of rubber to them to eliminate this gap.  If you have a single-stage snow blower, or your gap is less than 1/4", you probably don't need or can't use this fix.

 

The Solution:

 

Install this
Snow Blower Impeller Kit onto your two-stage snow blower and never fear another snow fall again!

  • Virtually eliminate the “clogged chute” syndrome when moving wet or heavy snow!
  •   Dramatically increase the snow throwing distance of your snow blower!
  •   Depending on how handy you are, this kit can be installed in 1-2 hours without too much difficulty!

*You can easily make an extra $50-$100 by modifying your friends, neighbors and relative's snow blowers with this kit.  

 

Each Snow Blower Impeller Kit contains the following Top Quality, "Made in the USA" materials:

  • (1) 1/4" thick reinforced rubber paddle (2"W x 5"L) - (you trim to fit as needed)

    • Cloth Inserted Rubber Sheet

    • Reinforced elastomer with minimum tensile strength of 500 PSI (4 MPA) 

    • Made from Styrene Butadiene rubber (SBR rubber)

  • (1) metal strap with holes - 1 3/8" W x 3 3/4"L

    • Punched flat bar grade 5 steel, 1/16" thick 
       

  • (3) bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket)

    • Hex bolts,  grade 5 steel
    • Hex lock nuts nylon insert, grade 5 steel
  • (1) self-tapping screw (#14 x 1) (not shown in picture to right)

    • Sheet metal screw, Hex washer head self drilling, grade 5 steel
  • Instruction Sheet

*** Custom sized metal straps and rubber paddles are available upon request at no extra charge!!

 

   

  

 

    Remember - This not only virtually eliminates the problem of wet snow clogging up the chute, but may increase the throwing distance of your snow blower by up to 30-50% or more! I say "virtually" because you can never completely eliminate clogging when the moisture content of the snow is well over 50% (eg; very wet slush turns to ice in your chute), but for every 10 times you previously had to clean out your chute, you "might" only need to do it once with this kit installed and you will see a noticeable increase in throwing distance regardless!

 

By the way, you may be asking yourself why the manufacturers leave a gap between the metal impeller blades and the metal cylinder walls in which the impeller rotates. The reason is that the impeller’s bearing wears over time and this wear causes some degree of “wobble” in the impeller’s rotation. If the metal impeller blade was made to fit "flush" against the metal cylinder walls with no gap, there would be no tolerance for "rotational wobble". They leave this gap to accommodate this “wobble” if/when it happens and avoid a situation where you have metal scraping on metal. That could cause significant damage to the impeller and the cylinder walls in which it rotates requiring very expensive repairs. Since this modification uses rubber strips which wear down evenly as they come in contact with the cylinder walls, any possible future “wobble” in the impeller’s rotation is negated without compromising the snow blower’s operational integrity or efficiency at moving snow and slush.

 

Get this kit now and turn your snow blower into the snow-moving beast it was meant to be!

 

To see real-life examples of this modification before you attempt this on your own snow blower, go to Youtube.com, search for “Snow Blower Impeller Kit™” or variations on the same theme and watch the videos. You will be amazed at what you see! Or, you can watch Ari P.'s Impeller Modification Description video above on YouTube which explains in great detail how this modification works and what benefits it will have on a snow blower's operational abilities.   (Disclaimer: We have absolutely no relationship with Ari P. and only offer this link for informational purposes, though we do have Ari's permission to link to his video. Thanks Ari! We only offer this link to his video because it provides a thorough independent explanation as to problems associated with two-stage snow blower impeller operations and the benefits of adding a modification kit such as this one to improve operational efficiency. Caveat Emptor!)

 

Please allow 2-3 business days for processing.
 

NOTE: INTERNATIONAL SHIPMENTS

Be Advised: International Flat Rate shipments are treated like 1st class mail and NOT assigned a USPS tracking # or tracked by USPS! The number generated  by USPS for International Shipments is an Export Label # only. Delivery from the US to any other Country is typically 7-10 business days from the date of Departure from a USPS facility HOWEVER, to track your shipment, the BUYER must contact their Country's Postal Service, provide them with the Export Label # and ask them to check the status of the package. The Seller is not responsible for this and cannot do it for you!

 

 

© 2012 SnowBlowerImpellerKit.com All Rights Reserved

© 2013 SnowThrowerImpellerKit.com All Rights Reserved

© 2012 ImpellerKit.com All Rights Reserved
Snow Thrower Impeller Kit>- Reg. Pending USPTO
SnowThrowerImpellerKit- Reg. Pending USPTO

Snow Blower Impeller Kit - Reg. USPTO


 

Web Site Terms And Conditions Of Use

In General

This web site (the "Site") is provided to you by  SnowBlowerImpellerKit™.com. Access to and use of this Site and the services available at this Site are subject to these Web Site Terms and Conditions of Use (the "Terms"). By accessing or using the Site or downloading materials from the Site, you warrant that you are of the age of majority and agree to these Terms. Please, review them carefully. If you do not agree to the Terms, you must immediately log off the Site and may not use the Site.

Collection of Visitor Information

Any information collected on this Site is governed by the SnowBlowerImpellerKit™.com  Privacy Policy, unless otherwise stated. To access and use certain services available through the Site, you may be required to register with SnowBlowerImpellerKit™.com  through a login/registration page and you must agree to be bound by any additional applicable terms and conditions which may be provided there.

Links to other Web Sites

This Site may contain links to other web sites. Additionally, other web sites may contain links to this Site. SnowBlowerImpellerKit™.com  does not review or monitor the web sites linked to this Site and is not responsible for the contents, terms of use, or privacy policies of any other web sites. Any link established by SnowBlowerImpellerKit™.com  does not in any respect whatsoever constitute an endorsement of the other web sites or create a relationship between SnowBlowerImpellerKit™.com  and the operators of other web sites. SnowBlowerImpellerKit™.com  disclaims any liability with respect to your use of any other web site, and you release SnowBlowerImpellerKit™.com  from any liability related to your use of any link to another web site or your use of any other web site. Where this Site contains a link to another web site owned and/or operated by SnowBlowerImpellerKit™.com , such web site use may be subject to different and/or additional terms of use and privacy policies.

Ownership of Intellectual Property, Limitations on Use

All content, data, and materials contained on this Site, together with all related rights with respect to registered and unregistered copyrights, registered and unregistered trademarks or service marks, patents, trade secrets and all other proprietary rights are exclusively owned or licensed by SnowBlowerImpellerKit™.com . All of the foregoing are protected under the laws of the State of New Hampshire, the United States, foreign jurisdictions, and/or international treaties.

This Site and all related proprietary rights shall remain the exclusive property of SnowBlowerImpellerKit™.com  or the applicable licensors of content, data, or materials. You are permitted to download or print one copy of material published on this Site solely for your personal, non-commercial use, provided that you do not modify the materials or remove or obscure any proprietary notices contained in the materials. Except as specified in the preceding sentence, you may not reproduce, distribute, modify, display, perform, prepare derivative works based on, adapt, re-post, or otherwise use this Site or the content, data, and materials contained on this Site. Use of this Site does not in any respect whatsoever constitute a grant of any license or other right to use or exploit any of the proprietary rights related to this Site.

Your Account

If you use this Site, you are responsible for maintaining the confidentiality of your account and password and for restricting access to your computer, and you agree to accept responsibility for all activities that occur under your account or password.

Information Submitted to this Site.

Any and all content and materials you send or submit to SnowBlowerImpellerKit™.com  or a third party provider on this Site, including, without limitation, comments, suggestions, photos, or contest or sweepstakes entries (collectively, "Submissions"), shall become the property of SnowBlowerImpellerKit™.com ; and you hereby transfer, sell, and assign to SnowBlowerImpellerKit™.com  all of your right, title, and interest in and to any such Submissions, including without limitation, any and all copyrights, trademarks, patents, trade secrets and/or other proprietary rights. SnowBlowerImpellerKit™.com  has no obligation of any kind whatsoever to maintain any confidentiality with respect to any such Submissions. SnowBlowerImpellerKit™.com  shall be free to use them for any purpose whatsoever without providing you notice or receiving your consent, and without restriction or compensation.

Disclaimer of Warranties and Limitation of Liability

THIS SITE IS PROVIDED ON AN “AS IS, WITH ALL DEFECTS” AND “AS AVAILABLE” BASIS WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, WARRANTIES OF TITLE, NON-INFRINGEMENT, OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NOTHING IN THESE TERMS OR IN ANY DESCRIPTION OF PRODUCTS OR SERVICES ON THE SITE SHALL CONSTITUTE A REPRESENTATION OR WARRANTY WITH RESPECT TO SUCH PRODUCTS OR SERVICES. YOU ACKNOWLEDGE, BY YOUR USE OF THIS SITE, THAT SUCH USE IS AT YOUR SOLE RISK. SnowBlowerImpellerKit™.com  EXPRESSLY DISCLAIMS ANY REPRESENTATIONS AND WARRANTIES THAT (I) THE SITE WILL OPERATE IN AN ERROR FREE OR UNINTERRUPTED MANNER; (II) THE SITE AND THE ONLINE SERVER THAT MAKES THE SITE AVAILABLE ARE FREE OF VIRUSES OR OTHER HARMFUL ELEMENTS; (III) THE SITE WILL SATISFY THE CUSTOMER’S REQUIREMENTS; (IV) THE RESULTS OBTAINED FROM THE USE OF THE SITE WILL BE EFFECTIVE, ACCURATE, OR RELIABLE; (V) SnowBlowerImpellerKit™.com  WILL PREVENT THE UNAUTHORIZED DISCLOSURE OF, UNAUTHORIZED USE OF, UNAUTHORIZED ACCESS TO, MISAPPROPRIATION OF, LOSS OF, OR ALTERATION OF ANY DATA OR INFORMATION; OR (VI) ANY ERRORS OR DEFECTS IN THE SITE WILL BE CORRECTED. SnowBlowerImpellerKit™.com  DISCLAIMS ANY REPRESENTATION OR WARRANTY THAT THE USE OF THE SITE WILL SATISFY, OR ENABLE YOU TO SATISFY, THE REQUIREMENTS OF ANY GOVERNMENT AGENCY, ASSOCIATION, OR OTHER ORGANIZATION. NOTHING IN THESE TERMS OR IN ANY ORAL OR WRITTEN DESCRIPTION OF THE SITE SHALL CONSTITUTE A REPRESENTATION OR WARRANTY WITH RESPECT TO THE SITE. SnowBlowerImpellerKit™.com  MAKES NO REPRESENTATION OR WARRANTY THAT CONTENT PROVIDED ON THIS SITE IS APPLICABLE OR APPROPRIATE FOR USE IN LOCATIONS OUTSIDE OF THE UNITED STATES. SnowBlowerImpellerKit™.com  IS NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS OR OMISSIONS RELATING TO PRICING, AVAILABILITY, TEXT, OR PHOTOGRAPHY. SnowBlowerImpellerKit™.com  MAKES NO REPRESENTATION OR WARRANTY THAT THE PRODUCTS OR SERVICES ADVERTISED OR OFFERED ON THIS SITE WILL BE AVAILABLE AT ALL TIMES, OR THAT THEY WILL BE AVAILABLE ON THE BASIS OF ANY INDICATED TERMS OR CONDITIONS. IN NO EVENT SHALL SnowBlowerImpellerKit™.com  BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE USE OF THIS SITE, WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. CERTAIN STATE LAWS DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR THE EXCLUSION OR LIMITATION OF CERTAIN DAMAGES. IF THESE LAWS APPLY TO YOU, SOME OR ALL OF THE ABOVE DISCLAIMERS, EXCLUSIONS, OR LIMITATIONS MAY NOT APPLY TO YOU, AND YOU MIGHT HAVE ADDITIONAL RIGHTS. Under no circumstances whatsoever shall SnowBlowerImpellerKit™.com ’s aggregate liability resulting from your use of this Site exceed Five Dollars ($5.00).

Indemnification

You agree to indemnify, defend, and hold harmless SnowBlowerImpellerKit™.com  and its successors and assigns from and against and in respect of any and all third party claims, demands, losses, costs, expenses, obligations, liabilities, damages, recoveries, and deficiencies, including interest, penalties, and reasonable attorneys' fees that it shall incur or suffer which relate to your use of this Site, your failure to perform any of your obligations under these Terms, or your breach of any of your representations or warranties made under these Terms.

Changes to Terms

These Terms may be changed without notice. You expressly waive any right to receive notice of any changes to these Terms. Any use of this Site following the date on which changes to these Terms or the Privacy Policy are published shall constitute your acceptance of all such changes. You should review these Terms often to determine whether any changes have been made.

Continued Operation, Accessibility and Maintenance of this Site

SnowBlowerImpellerKit™.com  may modify, change, suspend, terminate, or discontinue the operation of this Site or the provision of any products or services without notice, and reserves the right to refuse service to anyone at any time, with or without cause.

Continued Operation, Accessibility and Maintenance of this Site

SnowBlowerImpellerKit™.com  may modify, change, suspend, terminate, or discontinue the operation of this Site or the provision of any products or services without notice, and reserves the right to refuse service to anyone at any time, with or without cause.

General Provisions

Any failure by SnowBlowerImpellerKit™.com  to enforce any provision of these Terms shall not be construed as a waiver of any provision or the right to enforce same. These Terms shall be governed by the laws of the State of New Hampshire in the United States, without regard to its choice of law principles or rules. For the purpose of resolving conflicts relating to or arising out of these Terms, or arising out of any other dispute or claim associated with the Site, venue shall be in the State of New Hampshire only and, in addition, you hereby consent to the exclusive jurisdiction of the federal and state courts in Hennepin County in the State of New Hampshire. If any portion of these Terms are held to be invalid, such holding shall not invalidate the other provisions of these Terms.

Contact

For questions related to these Terms email SnowBlowerImpellerKit™.com  at legal@SnowBlowerImpellerKit™.com .com, or send a letter to:

SnowBlowerImpellerKit™.com

1 Brookview Drive Ext.

Pelham, NH. 03076